Concrete cutting in Maricopa AZ - clean, straight cuts right where you marked them
A sunken panel, a leak under the slab or a new drain line? We cut clean openings and spell out what's included.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What does concrete cutting involve, and what sets the price?
Concrete cutting in Maricopa, AZ means sawing or drilling hardened concrete along lines you choose, so a plumber can reach a pipe, a sunken panel can come out, or a new drain or conduit can pass through without a jackhammer cracking what's left.
United Maricopa Concrete Construction cuts concrete in Maricopa and the cities around it, and most calls start with something under or through a slab that has to change. The price depends on how many feet we cut, how thick and how heavily reinforced the slab is, how easy it is to reach, whether you need any round holes, and whether you want the pieces broken out and hauled away or left in place. The schedule depends less on the saw than on what comes before it, like marked lines, a check for steel or cables and any permit, so your written estimate spells out what we'll do and what's included.
How do you know you need concrete cut?
A sunken or lifted panel
One section of your driveway or patio has dropped or lifted at a joint, usually because the dirt under it washed out or settled. Cutting out just that panel lets us fix what's underneath and pour it back, while waiting lets the edge grow into a trip hazard and lets water get under more of the slab.
A leak under the slab
Wet spots, a drain that keeps backing up or a plumber telling you the problem is under the concrete all mean the line has to be reached from above. A clean saw cut opens only the strip they need, and putting it off lets leaking water soften the ground the slab sits on.
A new line through concrete
Adding a drain, a water or gas line, or power out to a patio means getting through concrete that's already there. A narrow cut or a round hole makes a tidy path, and waiting until other projects are finished usually means cutting through something newer.
How we handle concrete cutting
Before we cut, we want your lines marked and any plans you have, because the saw only goes where it's told, and we check for cables or steel wherever a cut could hit them. Then we set the saw on the line, cut to the depth the job needs, break out and load the pieces if that's part of the job, and clean up the slurry, the gray paste the blade leaves behind. Our quote says plainly whether we're only sawing or also breaking out and hauling the concrete away, so you know what will still be sitting in your yard when we leave.
Most cuts leave an opening that needs filling, and that's where I care most about the base. A patch poured on loose dirt sinks just like the panel it replaced, so we dig out and pack the subgrade, the ground the slab sits on, before new concrete goes in. Bigger replacements fall under our concrete driveway building and concrete patio construction work, where we cut control joints, shallow grooves that give the slab a planned place to crack, so cracks land on a line we chose. If the budget is tight, I'd put the money into the base before the surface finish, because you can redo a surface, but fixing what's underneath means cutting again.
Flat saw cuts in slabs
A walk-behind saw makes straight cuts across driveways, patios and floors, which is what you want for taking out a panel or opening a trench for a pipe. It suits most cutting at a house, where the lines run across a flat slab.
Core drilled round holes
A core drill bores a clean round hole for a pipe, drain or conduit without cutting a long trench. It suits a single line passing straight through a slab or wall, and it leaves the concrete around the hole whole.
Get a written estimate for your concrete cutting job
We reply within one business day. I'll come out, measure and send a free written estimate that spells out what's included, and there's no obligation to go ahead.
(602) 847-8405- office@concretemaricopa.com
- Based in
- Maricopa, AZ 85138
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM
What happens when you call us to cut concrete in Maricopa?
From your first call to the last piece hauled off, here's who does what and what you'll have in hand before any saw starts.
Tell us what needs cutting
Call (602) 847-8405 or send the form with where the slab is, rough cut lengths, any building plans and whether you want the concrete removed. That way I show up ready to measure instead of guessing.
I measure and write it up
I look at the slab, measure every cut and send an estimate that lists the work and what's included, down to who handles the broken pieces. You'll know what you're paying for before you say go.
We check, cut and clean
Once you say go, we line up any permit or inspection, check for steel and buried lines, and our crew cuts while I'm on site running it. If a new pour follows, I'm there from the pour through the finish.
Why Maricopa homeowners call United Maricopa Concrete Construction to cut concrete
One person quotes and runs it
I come out to look at the job and measure it myself, and I'm on site running our crew while they cut. We've been doing this in Maricopa since 2023, and the person who quoted you is the one you'll see on the day.
Fully licensed and insured contractor
We're fully licensed and insured. That matters because Arizona lets someone without a contractor's license take only casual or minor jobs under $1,000 in total, and never one that needs a local building permit.
Tile taught me about slabs
I set tile for years before I switched to concrete, and a lot of the cracked floors I tiled over came from a rushed slab underneath. That's why I'd rather spend an extra hour checking lines and what's in the concrete than explain a problem later.
On a cutting job, what matters most is knowing what's in the slab before the blade goes in. Call (602) 847-8405 or send us your lines and plans to set up a visit.
Concrete cutting and the work around it in Maricopa
I won't guess whether a cutting job needs a permit in Maricopa. The city's building office administers the codes for residential construction, and whether cutting alone needs a permit isn't settled, so if it isn't clear for your job, we ask the city or county building office before any work starts. If the cut opens the ground for a pipe or drain, Arizona lets you or a contractor dig only after all the utilities are marked, with fines of up to $5,000 per violation, so the digging waits until the marks are down.
Around Maricopa, most of our cutting calls come from homeowners who need a plumber under a slab, want a sunken driveway panel out, or are making room for a drain or a bigger patio. We get the same calls on jobs in Casa Grande and Chandler, and we handle them the same way.
Questions about concrete cutting in Maricopa
How much does concrete cutting cost in Maricopa?
Across the US, professional concrete saw cutting usually costs about $3 to $15 per linear foot, according to one national cost guide. Reinforced or deeper slabs cost more per foot than thin ones that are easy to reach, and core drilled holes are priced separately from saw cuts. Your written estimate puts a figure on your own job.
Does the price of cutting concrete include hauling it away?
Not always, because sawing and removal are separate jobs, and a cutter may make the cuts and leave the panels where they are. Breaking, hauling and disposal can cost more than the sawing itself, so check every quote you get for whether removal is included.
How do I get ready for a concrete cutting crew?
Mark the cut lines clearly and note the location and type of anything buried in or near them, like pipes or conduit. An industry flat-sawing guideline puts both on the owner before cutting starts, so pull out any plans you have before I come out to measure.
Where do I submit plans for a permit in Maricopa?
All plan submittals in Maricopa go in digitally through the city's VIP Portal, which you'll find through the city's permit center. When a job needs a permit, we take care of the paperwork and schedule the inspections for you.
How do I know if my slab has post-tension cables before cutting?
It isn't always obvious from the surface, so if a cut could reach post-tension cables or structural steel, the contractor may need drawings, scanning and an engineer's input before work starts. Those cables hold a lot of stored tension, unlike rebar, the ordinary steel bars that strengthen a slab, so plan a little extra time for the checks if your house might have them.
Is it safe to cut concrete inside a garage or house?
Not with a gas saw in a closed space. One cost guide reports that OSHA has documented workers dying of carbon monoxide poisoning while using a gasoline saw in a basement, and it says OSHA recommends hydraulic or pneumatic equipment in enclosed spaces. Ask any crew which saw they'll run indoors before you book.
Related concrete work after the saw cut
Concrete driveway building
When a cut-out panel or a worn driveway needs replacing, we pour new concrete on a base we dig out and pack, with joints cut where we choose.
Concrete patio construction
If a saw cut makes room for a bigger patio or a drain underneath, we can pour the new slab and tie it in cleanly with what's left.
Areas where we cut concrete around Maricopa
United Maricopa Concrete Construction is based in Maricopa, Arizona, and we also cut concrete for homeowners in Casa Grande, Chandler and nearby cities. Six of the areas we serve have their own page below.
Maricopa, AZ
Book your concrete cutting estimate today
Booking early leaves room for the slab checks and any permit before the day you need the opening.